Bosch Dishwasher E06 Code: Meaning & Fixes
- Meaning
- Door sensor fault: the control can't read the door sensor circuit, so it can't confirm the door is closed.
- Can I fix it?
- Sometimes, may need a pro
- Seen on
- Bosch dishwashers that show two-digit E codes.
Bosch’s instructions for E06 are short: reset the power at the breaker for 30 seconds, and call Bosch if the code stays. E06 is a door sensor circuit fault, so it’s worth closing the door firmly and checking the latch first. Some sites call E06 a leak alarm; on Bosch’s US code list, water in the base is E15.
Try this first
- Open the door and close it firmly until it latches.
- Check the latch area for food, a utensil or anything stopping the door from closing fully.
- Switch off the dishwasher's breaker for 30 seconds, then turn it back on.
- If E06 stays, call Bosch customer support.
What causes E06
| Cause | What you notice | What to check |
|---|---|---|
| Door not fully latched | E06 or beeping right after you close the door | Close firmly; check for anything in the way |
| Faulty door latch or switch | E06 returns with the door closed | Needs a technician |
| Wiring fault at the door hinge | E06 comes and goes as the door moves | Needs a technician |
Fix it step by step
Tap a step number to tick it off as you go. Ticks stay on this device.
-
Close the door properly
Open the door, check the latch and the catch on the tub for debris, and close it firmly until it clicks.
-
Reset at the breaker
Switch off the dishwasher's circuit breaker for 30 seconds, then switch it back on.
-
Run a test cycle
Run a short cycle with no dishes to see if the code clears.
-
Call Bosch if it stays
If E06 comes back, call Bosch customer support.
Safety: The door latch and switch sit behind the inner door panel next to mains wiring. Leave that to a technician.
When to call a technician
If the 30-second breaker reset doesn't clear E06, Bosch says to call customer support. The door latch, its switch or the wiring through the hinge needs a technician.
Questions people ask
Does E06 mean my Bosch dishwasher is leaking?
No. Bosch's US code list defines E06 as a door sensor circuit fault. Water in the base shows as E15.
How do I reset a Bosch dishwasher with E06?
Switch off its breaker for 30 seconds, then turn it back on and run a short empty cycle.
Why does my Bosch dishwasher beep with the door shut?
Bosch says beeping can mean the door isn't latched. Open it and close it firmly. If E06 stays after a reset, call support.